MSRP: $29.95
Price: $24.95
You Save: $5.00 (17%)
This Chrome Radiator Cap will add some glitz to an otherwise boring part of your engine compartment. It will release pressure at 15 psi and will work with a coolant recovery system.
|
MSRP: $29.95
Price: $24.95
You Save: $5.00 (17%)
This Chrome Radiator Cap will add some glitz to an otherwise boring part of your engine compartment. It will release pressure at 7 psi and will work with a coolant recovery system.
|
MSRP: $89.95
Price: $79.95
You Save: $10.00 (11%)
Dynamat Xtreme is the top of the line vehicle interior insulator. It has the highest sound damping efficiency and radiant heat deflection available. Ultra thin and lightweight, it can be used on firewalls, floors or doors. This box holds 12 square feet.
|
MSRP: $54.95
Price: $39.95
You Save: $15.00 (27%)
Accessory Aluminum Bracket set provides a solid, secure mount for an electric fan or oil cooler to a Flex-A-Lite Flex-A-Fit aluminum radiator. This kit fits Flex-A-Fit radiators with a 22" core size. Includes all required hardware.
|
MSRP: $23.95
Price: $19.95
You Save: $4.00 (17%)
Use this relay & wiring kit to engage your electric cooling fan when your A/C is turned on to provide additional required cooling at low speeds.
|
MSRP: $84.95
Price: $67.95
You Save: $17.00 (20%)
Use this attractive polished MADE IN USA overflow tank to prevent pushing coolant onto the ground and allow it to be drawn back into the radiator as your engine cools off. Tank size 13" tall 2 " diameter. 15 1/2" overall height. 20 ounce capacity.
|
MSRP: $84.95
Price: $69.95
You Save: $15.00 (18%)
Use this attractive polished MADE IN USA overflow tank to prevent pushing coolant onto the ground and allow it to be drawn back into the radiator as your engine cools off. Tank size 17" tall 2" dia. Overall height 19 1/2". 26 ounce capacity.
|
MSRP: $54.95
Price: $44.95
You Save: $10.00 (18%)
This adjustable thermostatic switch allows you to set the temperature you want the fan to turn on from 180 to 240 degrees. Recommended to be used with all electric fan installations.
|
|
|
MSRP: $19.95
Price: $16.95
You Save: $3.00 (15%)
Aluminum Fan Spacer 1" thick. Has a 5/8" hub pilot. Includes four 5/16" fine thread bolts. Will fit most Ford, GM and AMC applications. Use of the correct size fan spacer will allow proper positioning of the belt driven fan blade.
|
MSRP: $19.95
Price: $16.95
You Save: $3.00 (15%)
Aluminum Fan Spacer 1" thick. Has a 5/8" hub pilot. Includes four 5/16" fine thread bolts. Will fit most Ford, GM and AMC applications. Use of the correct size fan spacer will allow proper positioning of the belt driven fan blade.
|
MSRP: $24.95
Price: $19.95
You Save: $5.00 (20%)
Aluminum Fan Spacer 2" thick. Has a 5/8" hub pilot. Includes four 5/16" fine thread bolts. Will fit most Ford, GM and AMC applications. Use of the correct size fan spacer will allow proper positioning of the belt driven fan blade.
|
MSRP: $15.95
Price: $12.95
You Save: $3.00 (19%)
Gator Clips are the most secure way to mount an oil cooler to bracketry or a flat panel. A stack of three Gator Clips create an air gap between the cooler and mounting surface to provide additional air flow over all surfaces. Totally reuseable.
|
MSRP: $11.95
Price: $10.95
You Save: $1.00 (8%)
This kit allows you to mount a transmission or engine oil cooler or an electric cooling fan to the core of a radiator or A/C condenser. Includes 4 each nylon bolts,washers,push-nuts and rubber spacers.
|
MSRP: $11.95
Price: $10.95
You Save: $1.00 (8%)
Protects your cooling system from corrosion. A zinc annode pressed into a 1/4" pipe thread fitting attract corrosion to keep it away from the rest of your cooling system. Can be installed into radiator or engine block.
|
|
MSRP: $39.95
Price: $34.95
You Save: $5.00 (13%)
This Hexagon shaped radiator cap is machined from billet aluminum. The pressure release point is 18 psi.
|
MSRP: $39.95
Price: $34.95
You Save: $5.00 (13%)
This Scallop shaped radiator cap is machined from billet aluminum. The pressure release point is 16 psi.
|
MSRP: $11.95
Price: $9.95
You Save: $2.00 (17%)
This radiator cap fits various antique and classic applications with a 1" deep filler neck. Most standard filler necks are 3/4" deep. This cap has a 4 psi release rating.
|
MSRP: $11.95
Price: $9.95
You Save: $2.00 (17%)
This radiator cap fits various antique and classic applications with a 1" deep filler neck. Most standard filler necks are 3/4" deep. This cap has a 7 psi release rating.
|